New Arrival UV Aging Test Equipment Climatic TZ-1020 Test Chamber
Accelerated UV Testing Equipment INTRODUCTION:
The Accelerated UV Testing Equipment simulates environmental conditions such as ultraviolet, rain, high temperature, high humidity, condensation, and darkness in a natural climate. By recreating these conditions, they are combined into one cycle and automatically executed to complete the cycle. This is how the UV aging test chamber works. In this process, the equipment can automatically monitor the temperature of the blackboard and the temperature of the water tank. By configuring the irradiance measurement and control device (optional), the irradiance can be measured and controlled to stabilize the irradiance at 0.76W/m2. /340nm or specified setting value, and greatly extend the life of the lamp.
Accelerated UV Testing Equipment Function:
1. The UV-accelerated aging test chamber uses imported UVA-340 fluorescent UV light as a light source to simulate the damage caused by sunlight, rain and dew. The UV weatherproof box uses a fluorescent UV lamp to simulate the effect of sunlight, and uses condensed moisture to simulate dew.
2. The UV box can reproduce the hazards of outdoor months or years in days or weeks. Types of hazards include: fading, discoloration, loss of light, powdering, cracking, turbidity, air bubbles, embrittlement, strength, decay, and oxidation. This machine contains a shower device.
3. The ultraviolet accelerated aging test chamber can simulate environmental conditions such as ultraviolet, rain, high temperature, high humidity, condensation, darkness and the like in a natural climate, and by recreating these conditions, merge them into a loop, and let it automatically perform the loop. frequency. This is how the UV aging test chamber works.
Accelerated UV Testing Equipment SPECIFICATIONS:
| Model |
TZ-1020 |
TZ-1021 |
| Temperature Range |
RT+10~70°C |
| Temperature uniformity |
±2°C |
| Temperature fluctuation |
±0.5°C |
| Testing time |
0~999H, adjustable |
| Materials |
Inside and Outside SUS#304 stainless steel |
| Humidity range |
≥90%RH |
| Controller |
Korean TEMI programmable controller |
| Lamp power |
40W/Piece |
| Test cycle setting |
Illumination, condensation and water spray test cycle is programmable |
| Irradiance |
1.0W/m2 |
| Wavelength ultraviolet light |
UV-A: 315-400nm; UV-B: 280-315nm (8pcs, 1600h lifetime) |
| Distance from sample to lamp |
50±2mm (adjustable) |
|
Centre distance between
the lamp
|
70mm |
| Standard Specimen Size |
75×150mm or 75×3000mm (special specitications to be described in the contact) |
| Required water depth for water channel |
25mm, automatically control |
| Protection system |
Overload short circuit protection, over temperature protection, water lackin |
| Power |
220V/50Hz /±10% 4.5KW |
Accelerated UV Testing Equipment Application:
It is suitable for the aging test of non-metallic materials against sunlight and artificial light sources.
Accelerated UV Testing Equipment Details
Your message must be between 20-3,000 characters!
