Temperature And Humidity Test Chamber / Temperature Humidity Controlled Cabinets
Temperature And Humidity Test Chamber features:
1. High texture appearance, the body adopts arc shape, the surface is treated by mist surface stripe, and the plane has no reaction handle, easy to operate, safe and reliable.
2. Rectangular laminated glass viewing window, which can be used for observation of test products in the test. The window is equipped with anti-perspirant electric heater device to prevent water vapor condensation droplets, and high-brightness PL fluorescent lamp to keep the lighting inside the box.
3. The compressor circulation system adopts French "taikang" brand, which can effectively remove the lubricating oil between the condensing pipe and the capillary pipe, and the whole series adopts environmental protection refrigerant (R23, R404, R507).
4. The controller adopts imported LCD display screen, which can display the measured value, set value and time at the same time.
5. The controller has multiple program editing and temperature and humidity can be controlled quickly (OUICK) or SLOP.
6. The built-in movable pulley is easy to move and put and has a strong positioning screw fixed position.
Temperature And Humidity Test Chamber TECHNICAL PARAMETERS
| Model |
TZ-HW408 Temperature And Humidity Test Chamber |
| Internal Volume(L) |
408L |
| Dimensions |
Studio Size(mm) |
600*800*850 |
| Machine Size(mm) |
1100*1350*1750 |
| Structure |
Combined structure (If the door is not wide enough, small size is available, width reduced by 250 ~ 300mm) |
| Weight (Kg) |
About 500 |
| Performance |
Test Environment Conditions |
Environment temperature+25ºC,Relative humidity≤85%,No sample in test chamber. |
| Corresponding Standard |
GB/T 5170.2-1996 "Method for verification of basic parameters of
environmental test equipment for electric and electronic products"
|
| Test Method |
Completely stationary test mode for the object to be measured.
This method is the first choice for testing, research and semiconductor
screening of electronic components. |
| Parameters |
Control Methods |
Balanced temperature and humidity control mode(BTHC) PID Intelligent Adjustment |
| Temperature Range |
-40ºC~+150ºC -70ºC~+150ºC |
| Humidity Range |
20%~98%R.H (0%～100% R.H can be customized) |
| Heating Rate |
1-2ºC/min (Linear Adjustment 3-5℃/min can be Customized) |
| Cooling Rate |
0.7ºC-1ºC/min (Linear Adjustment 3-5℃/min can be Customized) |
| Uniformity |
Temperature: ±1.5ºC Humidity: ±2.5%R.H |
| Fluctuation |
Temperature: ±0.5ºC Humidity : ±2%R.H |
Our Services
- 1 Years Warranty, Lifelong Follow-up Services;
- Training how to install, operate and maintain the machine, and provide calibration service for our customers;
- Response within 8 hours once got questions from customers, send spare parts within 1 days after got notice;
- Engineers available to service on site to install and commissioning overseas.
Your message must be between 20-3,000 characters!
