|Place of Origin:||Guangdong, China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Wooden case outside with pallet, in total 1-2CBM|
|Delivery Time:||5-7 working days|
|Payment Terms:||L/C, T/T, Western Union, , MoneyGram|
|Supply Ability:||500 sets/ month|
|Product Name:||Salt Spray Test Chamber||Application:||Doing Acid And Corrosion Resistant Upon Surface Treatment Of Products Of Components|
|Relative Humidity:||≥85%HR||Temperature Resolution:||0. 5ºC|
|Temperature Deviation:||±1ºC||Temperature Uniformity:||1ºC|
|Temperature Fluctuation:||±0.5ºC||Spray Pressure:||1.00±0.01kgf/cm²|
|PH Value:||Neutral 6.5 To 7.2 Acidity 2.8 To 3.5||Warranty Period:||12 Months|
salt spray test machine,
salt fog test chamber
Salt spray testing chamber with 120L for neutral or acid test in hardware
Salt spray test box is specially used for testing various metal materials and products. After the surface treatment, such as painting, coating, electroplating, anodic film or anti-rust treatment, it is a kind of test equipment that simulates the natural environment and is in line with the actual conditions to basically effectively resist and understand the corrosion.
The shell of the machine is made of high quality PVC board, with strong structure and no deformation;Temperature controller, digital display, PID control, accurate control, balance long-term operation without drift, error ±0.1℃;The glass fiber reinforced plastic (GFRP) inside the shell is molded by integral molding, resistant to corrosion, collision, easy to clean and no leakage.Precision glass nozzle, ensure no crystal blocking during operation;Unique air rod (no air source), easy to close the door, water seal structure, no salt spray overflow;The spray tower is equipped with conical disperser, with functions of guiding fog, adjusting fog amount and even fog falling.Double pressure high speed and over temperature protection, insufficient water level warning;Automatic/manual water feeding system is adopted, which can automatically/manually replenish the water level when the water level is low.
-----Specification & Techincal data-----
|Power Supply Conditions and Sources||1. AC 220V two-phase + protective ground; Voltage fluctuation range 10% V;
2. Frequency fluctuate range within 50±0.5HZ; Power supply in TN-S or TT mode
3. The grounding resistance of the protective ground wire is less than 4Ω.
4.The user is required to configure the corresponding capacity of air or power switch for the equipment at the installation site.
This switch must be used to independently control the device.
|Installation Condition||1.Room with convection system, independent installation to prevent escaping salt spray from corroding surrounding equipment when the cover is removed.
2. The distance between the left, right and rear side panels of the test box and the wall shall not be less than 600mm, and the distance between the front and the wall shall not be less than 800mm.
|Main Control Parameters||Relative Humidity: ≥85%HR
Temperature Resolution:0. 5ºC
Temperature Deviation: ±1ºC
Spraying(m1/80cm²/h)1.0~2.0(Collect at least 16 hours, take the average)
PH Value:Neutral 6.5 to 7.2 Acidity 2.8 to 3.5
Test Room Temperature:RT→+50ºC≤50 min
Pressure Barrel Temperature:RT→+65ºC≤35 min
The test bed is suitable for all kinds of comprehensive salt spray tests on all metal and non-metal samples of suitable size and weight (as described in the text specification).
The test was conducted according to the following items:
Neutral salt spray test (NSS test, AASS acid salt spray test, CASS accelerated salt spray test)
Test method for surface treatment by saline spray
1. Wooden case with pallet outside.
2. The total volume is about 2-4 CBM.
3. Suitable for export, loading and unloading.
Packaging details are as follows:
Contact Person: sales